Stargate control panel layout and measurements
- typed by Franklin Bowen (bowens@erols.com) 4/8/96
================================================================================
Here's the layout (courtesy of Steve Hawley - hawley@adobe.com)
(1) (2)
O (T)(F)
(R) (S)
(H) (I)
1,2 - 1 and 2 player start, tranparent red
O - up,down lever, red (can use a Joust stick)
R reverse, white
T thrust, white
F fire, white
S smart bomb, green
I inviso, red
H hyperspace, white
FYI, the defender layout was identical except that the 1 & 2 player
start buttons were white and there was no inviso. The wiring harness
for stargate will work on a Defender board set.
================================================================================
================================================================================
All measurements are in cm
- plywood is 1.9 thick
17.1
*----------
|A 14.7 ^
| |
14.7 | 11.6 17.2 (from side)
| |
|B 7.35 v
*------
9.05
* is rounded and around 2.1 cm thick
- Angle A is 99 o while angle B is 101 o.
================================================================================
(looking down on top of control panel)
<- 62 ->
*----------------------------------------------------------------------------*
| |
| 2.5 |
| - 4.7 4.7 4.7 4.7 |
| | | 27.15 O O 27.15 O O 11.75 |
| | | <- 15.5 -> |
|12.9|O| 7.65 |
| | | O 18.4 |
| | | 9.7 |
| - O 10.65 |
|<- 18.5 -> O 21.25 |
| 29.45 O 29.45 |
| 4.7 |
*----------------------------------------------------------------------------*
- Os are buttons and joystick
- measurements are from CENTER of button hole THROUGH the number
- measurements are from the EDGE of the joystick THROUGH the number
- the measurements from the bottom would be if it was UNROUNDED!
- rounding starts 15.4cm from top
- button holes are 2.95-3cm across
- channel for joy is 2.45cm wide and ABOUT 6.7-7cm long
|
