|
|
|
Congo Bongo High Score Save Kit -- Installation Guide
There are two types of Sega Congo Bongo Boardsets. The installation is
similar for each type of boardset and similar to other HS kits. The key is to
locate the Z80 CPU on the controller board. Remove the Z80, install it into the
kit, then install the kit back into the Z80 socket. Always pay close attention
to pin-1 orientation and be careful not to bend any pins. Detailed instruction
links are provided below.
|
3 Boardset Style (834-5165) |
2 Boardset Style (834-5180) |
| A 3 boardset style which contains two large boards
and one 1/2 size board. The HS kit plugs into the z80 socket located on
the controller board underneath the smaller 1/2 size (sound) board. The
PCBs are labelled 834-5168 (sound), 834-5166 (controller),
834-5167 (video). And the overall product number for the entire
boardset is 834-5165.
Click image for
a larger view
Congo Bongo 3-Boardset
Detailed 3-boardset installation instructions and photos
|
A 2 boardset style which contains two large
boards. With this type the sound board and controller board are combined
onto a single controller board. The HS kit plugs into the z80 socket
located on the top controller board. This PCBs are labelled
834-5181 (controller), and 834-5167 (video). And the
overall product number for the entire boardset is 834-5180.
Click image for
a larger view
Congo Bongo 2-Boardset
Detailed 2-boardset installation instructions and photos
|
< Prev Page
|
|
