Howdy
 
These are the DIP switch settings and volume potentiometer
information for the Stratovox PCB, transcribed directly from the
original manual.  Note, I do not guarantee their accuracy and if
your board goes up in smoke because you followed this list or your
dog runs away or anything else, IT IS NOT MY FAULT!  If you have
any questions, you can reach me (Jason Dante Bardis) at
jasonbar@engineering.ucsb.edu
 
 
DIP SWITCH SETTINGS
 
SWITCH 1...SETS THE NUMBER OF PHOTON ROCKETS
	OFF...3 PHOTON ROCKETS
	ON...5 PHOTON ROCKETS
 
SWITCH 2...CONTROLS THE NUMBER OF ASTRONAUTS FROM FRAME TO FRAME
	OFF...REMAINS THE SAME AS THE PREVIOUS FRAME
	ON...10 ASTRONAUTS RESET
 
SWITCHES 3&4...SETS WHICH FRAME 2 ATTACKING GROUPS OF UFOs START
TO APPEAR
	FRAME NUBMER	SWITCH 3	SWITCH 4
		2		OFF		OFF		CONSERVATIVE
		3		ON		OFF
		4		OFF		ON
		5		ON		ON		LIBERAL
 
SWITCH 5...CONTROLS THE NUMBER OF ASTRONAUTS THAT ARE KIDNAPPED BY
ATTACKING UFOs (WHEN SWITCH 2 IS SET AT OFF).
	OFF...LIBERAL
	ON...CONSERVATIVE
 
SWITCH 6...CONTROLS SCREEN INVERSION
	OFF...INVERSION
	ON...NO INVERSION
NOTE: THIS SWITCH MUST BE LEFT IN THE ON POSITION.
 
SWITCH 7...CONTROLS SCREEN DIRECTION
	OFF...NORMAL DIRECTION
	ON...REVERSED DIRECTION
NOTE: THIS SWITCH MUST BE LEFT IN THE OFF POSITION.
 
SWITCH 8...CONTROLS VOICE IN THE ATTRACT MODE
	OFF...VOICE IS NOT HEARD
	ON...VOICE IS HEARD
 
 
 
VOLUME POTS:
POT FOR ADJUSTING THE VOLUME OF THE VOICE.  CCW IS UP.
	(LOCATED NEAREST TO EDGE)
 
POT FOR ADJUSTING THE TOTAL SOUNDS.  CW IS UP.
	(LOCATED BETWEEN THE OTHER 2 POTS)
 
POT FOR ADJUSTING THE EXPLOSION SOUNDS OF THE PHOTON ROCKETS.  CW
IS UP.
	(LOCATED FARTHEST FROM EDGE)