|
|
|
Vanguard Pinouts
Centuri, 1981
Addition by Jonathan Walton 21Sep96
1) Tie the post of the speech board (SK6) to -5V
Solder Parts
-----------------------------------------------------------
Gnd | 2 | 1 | Gnd
Gnd | 4 | 3 | Gnd
+5V | 6 | 5 | +5V
+5V | 8 | 7 | +5V
P2 Move Up |10 | 9 | P2 Move Down
P2 Move Left |12 |11 | P2 Move Right
P2 Fire Right |14 |13 | P2 Fire Left
P2 Fire Down |16 |15 | P2 Fire Up
P1 Move Up |18 |17 | P1 Move Down
P1 Move Left |20 |19 | P1 Move Right
P1 Fire Right |22 |21 | P1 Fire Left
P1 Fire Down |24 |23 | P1 Fire Up
1P Start |26 |25 | Coin
Coin |28 |27 | Gnd
2P Start |30 |29 | Gnd
Red |32 |31 | Green
Blue |34 |33 | Sync
Spkr+ |36 |35 | (Not Used?)
+12V |38 |37 | +12V
+12V |40 |39 | +12V
Gnd |42 |41 | Gnd
Gnd |44 |43 | Gnd
Notes:
Tie Spkr- to Gnd
Vanguard -- Vertical Centuri '81
***************************************************************************
***************************** VANGUARD PINOUTS ****************************
***************************************************************************
---------------------------------------------------------
Solder Side | Parts Side
-------------------------+-------------------------------
GND | 2 | 1| GND
GND | 4 | 3| GND
+5V | 6 | 5| +5V
+5V | 8 | 7| +5V
2P Up |10 | 9| 2P Down
2P Left |12 | 11| 2P Right
2P Fire Right |14 | 13| 2P Fire Left
2P Fire Down |16 | 15| 2P Fire Up
1P Up |18 | 17| 1P Down
1P Left |20 | 19| 1P Right
1P Fire Right |22 | 21| 1P Fire Left
1P Fire Down |24 | 23| 1P Fire Up
1P Start |26 | 25| Coin Switch #1
Coin Switch #2 |28 | 27| GND
2P Start |30 | 29| GND
Video Red |32 | 31| Video Green
Video Blue |34 | 33| Video Sync
Speaker+ |36 | 35|
+12V |38 | 37| +12V
+12V |40 | 39| +12V
GND |42 | 41| GND
GND |44 | 43| GND
----------------------------------------------------------
Note: Connect Speaker- to GND
Note: Connect post on speech board (SK6) to -5V
***************************************************************************
**************************** VANGUARD SWITCHES ****************************
***************************************************************************
__________________DIP SWITCH located on SK5 board___________
Setting Value 1 2 3 4 5 6 7 8
Type Upright Off
Cocktail On
Number Ships 3 Off Off
4 On Off
5 Off On
unused (3) On On
Coin 1 coin 1 play Off
1 coin 2 plays On
Note: SW2, SW3, and SW4 are factory settings and should remain in Off
position. SW8 is non-functional.
***************************************************************************
|
|
|
