TRON
----
This is a complete pinout for the Bally/Midway
game TRON. It was a beer to type in so when
you get it running pour one for me :)
Tapper typed in by Denis Hruza (king@cybercomm.net)
Plagiarized by Franklin Bowen for TRON (bowens@erols.com or tfbowen@ingr.com)
There is a Filter Assembly and 5 boards not
including the Angle Encoder Board (2 of
them if it's a cocktail):
Power Supply, Dual Amp, Video Gen,
CPU, and Sound I/O (actually, I
believe it's labeled SUPER Sound I/O.
Can you say `WOW!'?).
The only boards you'll actually need
to play the game are the Video Gen, CPU,
and Sound I/O and these are actually
attached in a three board sandwich.
You'll need to make a conversion harness
and find a way to amp the sound, though.
=======================================
VIDEO GEN BOARD (A084-90908-A968)
=======================================
This board has no connectors that go
outside of the 3 board sandwich. It
only has a couple of connectors for
those 2 thin ribbon cables which run
to the CPU Board.
=======================================
CPU BOARD (A084-91399-A968)
=======================================
This board has 5 connectors for those
thin ribbon cables. 2 go to the Video
Gen Board and 3 go to the SUPER Sound
I/O Board. Outside of that is:
J1 - 20 pin (GOES TO J4 POWER SUPPLY)
2 - +5v
3 - +5v
4 - +5v
6 - GND
7 - GND
10 - GND
17 - RESET
16 - V.BATT
18 - +12v
20 - A.GND
15 - KEY
(2 WIRES GO TO J5 POWER SUPPLY)
5 - +5v
14 - GND
----------------------------------------
J2 - 9 pin (MONITOR)
1 - RED
2 - GND
3 - GREEN
4 - GND
5 - BLUE
6 - GND
7 - KEY
8 - /HBLNK
9 - /VBLNK
==========================================
SOUND I/O BOARD (A084-90009-A968)
==========================================
J3 - 9 pin (TO 1K VOLUME CONTROL)
1 RVR ------\ TO 1K VOLUME CONTROL
2 RVS ------| " " (center tap)
3 RV12 ------/ " "
4 - KEY
(4 WIRES GO TO J1:2,3,6 ON THE DUAL AMP BOARD)
6 - RIGHT SHIELD
7 - RIGHT AUDIO
8 - LEFT SHIELD
9 - LEFT AUDIO
------------------------------------------
J4 - 19 pin
1 - COIN 1
2 - COIN 2
3 - PLAYER 1 START
4 - PLAYER 2 START
5 - PLAYER 1 FIRE
6 - TILT
7 - SERVICE
8 - TEST
9 - COMMON (J4:3-5,7; J5:1-8; J6:9)
14 - KEY
19 - COMMON (J4:1,2,6,8)
(7 WIRES GO TO 10-4 ON THE
PLAYER ONE ANGLE ENCODER BOARD)
10 - D0
11 - D1
12 - D2
13 - D3
15 - D4
16 - D5
17 - D6
-------------------------------------------
J5 - 23 pin (9 WIRES GROUNDED BY J4:9)
1 - PLAYER 1 LEFT
2 - PLAYER 1 RIGHT
3 - PLAYER 1 UP
4 - PLAYER 1 DOWN
5 - PLAYER 2 LEFT
6 - PLAYER 2 RIGHT
7 - PLAYER 2 UP
8 - PLAYER 2 DOWN
19 - KEY
(2 WIRES GO TO J5 POWER SUPPLY)
20 - COIN METER RETURN GOES TO CONN 5 PIN 10 ON POWER SUPPLY
21 - COIN METER UNREG+5 GOES TO CONN 5 PIN 1 ON POWER SUPPLY
-------------------------------------------
J6 - 10 pin (ONLY USED FOR A COCKTAIL VERSION)
8 - KEY
(7 WIRES GO TO 10-4 ON THE PLAYER TWO ANGLE ENCODER BOARD)
1 - D0
2 - D1
3 - D2
4 - D3
5 - D4
6 - D5
7 - D6
(1 WIRE GROUNDED BY J4:9)
9 - PLAYER 2 FIRE
============================================
DUAL AMP BOARD (A082-90910-0000)
============================================
J1 - 8 Pin
4 - KEY
(3 WIRES GO TO J3 CPU BOARD)
2 - RIGHT AUDIO
3 - SHIELD (also called STRAND)
6 - LEFT AUDIO
(2 WIRES GO TO J5 POWER SUPPLY)
5 - AUDIO RETURN
8 - AUDIO
--------------------------------------------
J2 - 6 Pin
3 - KEY
(2 WIRES GO TO LEFT SPEAKER)
4 - + (PLUS)
6 - - (MINUS)
(2 WIRES GO TO LEFT SPEAKER)
1 - + (PLUS)
2 - - (MINUS)
===========================================
ANGLE ENCODER BOARD (A082-91418-D000)
===========================================
13 Pin
11 - KEY
(3 WIRES GO TO J5 POWER SUPPLY)
1 - +12v
2 - GND
13 - +5v
(7 WIRES GO TO J4:10-13,15-17 (J6:1-7 FOR PLAYER 2))
10 - D0
9 - D1
8 - D2
7 - D3
6 - D4
5 - D5
4 - D6
===========================================
POWER SUPPLY BOARD (A082-90412-8000)
===========================================
J3 - 9 Pin (GOES TO FILTER ASSEMBLY)
2 - 8v COM
3 - 8v COM
4 - 8v UNREG
5 - 12v COM
6 - 15v UNREG
7 - 5v COM
8 - 8v UNREG
9 - 12v COM
------------------------------------------
J4 - 15 Pin (GOES TO J1 CPU)
1 - V.BATT
3 - +5v
4 - A.GND
5 - +5v
6 - +5v
8 - GND
9 - GND
10 - GND
12 - +12v
15 - RESET
-------------------------------------------
J5 - 15 Pin
(2 WIRES GO TO J1 CPU)
2 - +5v
5 - GND
(2 WIRES GO TO J5 SUPER SOUND I/O)
1 - COIN METER UNREG+5
10 - COIN METER RETURN
(3 WIRES GO TO THE ANGLE ENCODER BOARD(S)S)
3 - GND
4 - +5v
9 - +12v
(2 WIRES GO TO J1 DUAL AMP)
13 - AUDIO
15 - AUDIO RETURN
(2 WIRES GO TO COIN DOOR & DISPLAY LIGHTS)
11 - RETURN FROM LIGHTS (GND?)
14 - +12v
------------------------------------------
J6 - 3 Pin (GOES TO MT-93 XFORMER)
2 - ??? (is it center tap?)
3 - 12v (VIA 2 AMP SLO BLO FUSE)
============================================
FILTER ASSEMBLY (A945-00002-0000)
============================================
INPUT - 9 Pin (FROM MT-96 XFORMER)
1 - 8v (AC?)
2 - CENTER TAP 8v?
3 - 8v (AC?)
4 - CENTER TAP 15v?
5 - CENTER TAP 8v?
6 - CENTER TAP 15v?
7 - 15v (AC?)
8 - GND?
9 - 15v (AC?)
------------------------------------------
OUTPUT - 8 Connections (TO POWER SUPPLY)
(THEY ARE UNNUMBERED IN THE SCHEMATICS.
SEE THE POWER SUPPLY BOARD SECTION FOR
WHAT IT NEEDS)
|
