Howdy
These are the DIP switch settings and volume potentiometer
information for the Stratovox PCB, transcribed directly from the
original manual. Note, I do not guarantee their accuracy and if
your board goes up in smoke because you followed this list or your
dog runs away or anything else, IT IS NOT MY FAULT! If you have
any questions, you can reach me (Jason Dante Bardis) at
jasonbar@engineering.ucsb.edu
DIP SWITCH SETTINGS
SWITCH 1...SETS THE NUMBER OF PHOTON ROCKETS
OFF...3 PHOTON ROCKETS
ON...5 PHOTON ROCKETS
SWITCH 2...CONTROLS THE NUMBER OF ASTRONAUTS FROM FRAME TO FRAME
OFF...REMAINS THE SAME AS THE PREVIOUS FRAME
ON...10 ASTRONAUTS RESET
SWITCHES 3&4...SETS WHICH FRAME 2 ATTACKING GROUPS OF UFOs START
TO APPEAR
FRAME NUBMER SWITCH 3 SWITCH 4
2 OFF OFF CONSERVATIVE
3 ON OFF
4 OFF ON
5 ON ON LIBERAL
SWITCH 5...CONTROLS THE NUMBER OF ASTRONAUTS THAT ARE KIDNAPPED BY
ATTACKING UFOs (WHEN SWITCH 2 IS SET AT OFF).
OFF...LIBERAL
ON...CONSERVATIVE
SWITCH 6...CONTROLS SCREEN INVERSION
OFF...INVERSION
ON...NO INVERSION
NOTE: THIS SWITCH MUST BE LEFT IN THE ON POSITION.
SWITCH 7...CONTROLS SCREEN DIRECTION
OFF...NORMAL DIRECTION
ON...REVERSED DIRECTION
NOTE: THIS SWITCH MUST BE LEFT IN THE OFF POSITION.
SWITCH 8...CONTROLS VOICE IN THE ATTRACT MODE
OFF...VOICE IS NOT HEARD
ON...VOICE IS HEARD
VOLUME POTS:
POT FOR ADJUSTING THE VOLUME OF THE VOICE. CCW IS UP.
(LOCATED NEAREST TO EDGE)
POT FOR ADJUSTING THE TOTAL SOUNDS. CW IS UP.
(LOCATED BETWEEN THE OTHER 2 POTS)
POT FOR ADJUSTING THE EXPLOSION SOUNDS OF THE PHOTON ROCKETS. CW
IS UP.
(LOCATED FARTHEST FROM EDGE)
|