Star Wars

Table 1-2 Switch  settings for play options
seeetings of 8-toggle switch of Star Wars game PCB (at 10D)

1     2     3    4    5    6    7   8   options
------------------------------------------------------------------------------
On   On                                6 starting shields
Off  On                                7 starting shields
On   Off                               8 starting shields
Off  Off                               9 starting sheilds
           On   On                     easy game play
           Off  On                     moderate gaem play
           On   Off                    hard game play
           Off  Off                    hardest game play
                      On  On           0 bonus shields for dest. Death Star
                      Off On           1 bonus shield for dest. Death Star
                      On  Off          2 bonus shields for dest. Death Star
                      Off Off          3 bonus shields for dest. Death Star
                                On     Music in Attract mode
                                Off    No music in Attract mode
                                    On Freeze Mode
                                   Off Normal game play
 
the recommeneded settings are 6 shields, hard game play, 1 bonus shield, music
in attract, and normal game play
 
There is another 8-toggle switch that controls the amount of coins and such
If you have setting 1 and 2 both On, it will give free game play, otherwise
the sequence is the same as above, with options as follows: 2 credits, 1, 1/2.
The other settings just deal with the 2 coin mechanisms, and I doubt they
would be important to you.  This setting switch should be called 10E/F
 
There is one more 4 setting toggle switch, only 1 is used.  If it is on then
The outputs of counter driver 1 and 2 are tied together (for 1 counter). If it
is off, then the counters are separate (for 2 counters).