KUNG-FU MASTER
--------------

From: keay@tiuk.ti.com (John Keay)

Nobody asked for them, but since I figured them out last night and 
I know quite a few of us collect pinouts as avidly as we collect
games I thought I may as well post them. :-)

[Updated by David Holcomb -- some pins were not labeled]
[Note: The pinout *may* need to be reversed.  Pin 1 would be
pin 22, pin 2 would be pin 21, and so on.]

IREM CORP. 1984          Kung-Fu Master
-------------------------------------------------------------
               Solder Side             Parts Side
                       GND  | A | 1 |  GND
                       +5V  | B | 2 |  +5V
                       +5V  | C | 3 |  +5V
                    Coin A  | D | 4 |  Test Switch 
                   1P Down  | E | 5 |  1P Up
                   2P Down  | F | 6 |  2P Up
                      N/U   | H | 7 |  Blue
                    Green   | J | 8 |  Red
                  2P Punch  | K | 9 |  1P Punch
                  Speaker + | L | 10|  Speaker -
                      +12V  | M | 11|  +12V     
                      +12V  | N | 12|  +12V
                     Csync  | P | 13|  Coin B
              Coin Meter B  | R | 14|  N/U
                   1P Start | S | 15|  2P Start
                   2P Kick  | T | 16|  1P Kick
                   2P Right | U | 17|  1P Right
                   2P Left  | V | 18|  1P Left
                       N/U  | W | 19|  Coin Meter B
                       N/U  | X | 20|  N/U
                       GND  | Y | 21|  GND
                       GND  | Z | 22|  GND