|
|
|
***************************************************************************
BattleLane Vol. 5 -- Vertical Taito/Romstar '86
***************************************************************************
**************************** BATTLELANE PINOUT ****************************
***************************************************************************
--------------------------------------------------------
Solder Side | Parts Side
-------------------------+------------------------------
2P Down | A | 1 | 1P Down
2P Up | B | 2 | 1P Up
2P Left | C | 3 | 1P Left
2P Right | D | 4 | 1P Right
| E | 5 |
| F | 6 |
| H | 7 |
? | J | 8 | Service
2P Fire | K | 9 | 1P Fire
2P Missile | L | 10| 1P Missile
2P Start | M | 11| 1P Start
Coin Switch #2 | N | 12| Coin Switch #1
Coin Counter #2 | P | 13| Coin Counter #1
Video Red | R | 14| Video Green
Video Blue | S | 15| Video Sync
| T | 16|
Speaker | U | 17| Speaker
+12 | V | 18|
+5 | W | 19| +5
+5 | X | 20| +5
GND | Y | 21| GND
GND | Z | 22| GND
------------------------------------------------------
Note that Video Ground must be connected to +5
***************************************************************************
**************************** BATTLELANE ADAPTER ***************************
***************************************************************************
My board came with a fingerboard connector which plugs onto the
BattleLane board and supplies the following pinouts.
--------------------------------------------------------
Solder Side | Parts Side
-------------------------+------------------------------
| A | 1 |
| B | 2 |
| C | 3 |
| D | 4 |
| E | 5 |
Video Sync | F | 6 | Video Green
Video Red | H | 7 | Video Blue
GND | J | 8 | GND
1P Down | K | 9 | 1P Missile
| L | 10| 1P Fire
| M | 11| 1P Up
1P Right | N | 12| 1P Left
2P Start | P | 13| 1P Start
| R | 14|
| S | 15| Coin Switch #1
Coin Counter #1 | T | 16| Speaker
| U | 17| Speaker
+5 | V | 18|
| W | 19|
| X | 20|
| Y | 21|
| Z | 22|
------------------------------------------------------
Note that Video Ground must be connected to +5
There are also some labeled wires coming off the connector:
GND (black and green)
+5 (red)
+12 (yellow)
|
|
|
